- Home
- Fairs & Events
- ENGEL at the Fakuma 2024
ENGEL at the Fakuma 2024
15 - 19 October 2024
get connected – solutions for your success
The ENGEL Group's portfolio always offers you the right solution for your challenge - whether it's a production cell, process technology or digitalisation solution. With our solutions, you benefit from reduced energy consumption, a smaller footprint and increased productivity.
 "ENGEL at the Fakuma 2024")
The simple and economical solution: our fully automatic system produces fittings on a tie-bar-less victory with a clamping force of 160 tonnes.
Simple operation: full integration of the peripherals in the CC300 plus machine control system
High efficiency: parts ready for dispatch using belt picking
Higher productivity: Simple set-up thanks to menu-guided tool change
Maximum output with the lowest clamping force in liquid silicone processing: the tie-bar-less e-victory 100 produces single cores from liquid silicone with a 256-cavity mould.
High process stability: Optimum pressure distribution over the entire clamping surface
Optimum part quality: Precise moulding of all cavities
Simple operation: integration of the dosing system into the machine control system via OPC-UA/EM 82.3 interface
All-electric efficiency for thin-wall packaging: We present the new e-mac 500 with a large-volume 4L food container application.
Increased area productivity: particularly small footprint
Reduced production costs: up to 30% less energy consumption
Simple operation: In-mould labelling automation fully integrated into the machine control unit
Cost-efficient injection moulding production for the mobility of tomorrow: battery housing halves for electric two-wheelers are produced on a WINTEC two-platen machine.
Plastic instead of metal: lightweight, robust plastic housings for traction batteries
Attractive investment: Economical production cell for near-standard applications
Simple operation: ENGEL automation fully integrated in WINTEC machine control unit
Space-saving with top performance: Our viper 20 DR shows how you can use the double robot to remove components and place them efficiently and space-savingly in boxes.
Low energy consumption: New combined hand axles with 48V technology
Space-saving: New box transfer in tiered design
Higher productivity: shortest cycle times thanks to iQ motion control
High efficiency: savings in compressed air thanks to vacuum economy circuit
Simple and easy-to-use programming: Using the viper 4 as an example, you can experience the advantages of our simple operating philosophy at first hand.
Space-saving: compact design
Low energy consumption: 48V technology
Illustrative: Interactive system
System integration of a complex system: The bin-picking application demonstrates the simple handling and separation of complex bulk material inserts. Together with our partner SCAPE, we demonstrate the possibilities of complete system automation.
High flexibility: easix articulated robots
Simple operation: fully integrated into the machine control system
Simple solution for a complex challenge: Simple separation of bulk goods
The simple and economical solution: our fully automatic system produces fittings on a tie-bar-less victory with a clamping force of 160 tonnes.
Simple operation: full integration of the peripherals in the CC300 plus machine control system
High efficiency: parts ready for dispatch using belt picking
Higher productivity: Simple set-up thanks to menu-guided tool change
Maximum output with the lowest clamping force in liquid silicone processing: the tie-bar-less e-victory 100 produces single cores from liquid silicone with a 256-cavity mould.
High process stability: Optimum pressure distribution over the entire clamping surface
Optimum part quality: Precise moulding of all cavities
Simple operation: integration of the dosing system into the machine control system via OPC-UA/EM 82.3 interface
All-electric efficiency for thin-wall packaging: We present the new e-mac 500 with a large-volume 4L food container application.
Increased area productivity: particularly small footprint
Reduced production costs: up to 30% less energy consumption
Simple operation: In-mould labelling automation fully integrated into the machine control unit
Cost-efficient injection moulding production for the mobility of tomorrow: battery housing halves for electric two-wheelers are produced on a WINTEC two-platen machine.
Plastic instead of metal: lightweight, robust plastic housings for traction batteries
Attractive investment: Economical production cell for near-standard applications
Simple operation: ENGEL automation fully integrated in WINTEC machine control unit
Space-saving with top performance: Our viper 20 DR shows how you can use the double robot to remove components and place them efficiently and space-savingly in boxes.
Low energy consumption: New combined hand axles with 48V technology
Space-saving: New box transfer in tiered design
Higher productivity: shortest cycle times thanks to iQ motion control
High efficiency: savings in compressed air thanks to vacuum economy circuit
Simple and easy-to-use programming: Using the viper 4 as an example, you can experience the advantages of our simple operating philosophy at first hand.
Space-saving: compact design
Low energy consumption: 48V technology
Illustrative: Interactive system
System integration of a complex system: The bin-picking application demonstrates the simple handling and separation of complex bulk material inserts. Together with our partner SCAPE, we demonstrate the possibilities of complete system automation.
High flexibility: easix articulated robots
Simple operation: fully integrated into the machine control system
Simple solution for a complex challenge: Simple separation of bulk goods
Our experts look forward to meeting you at our stand at Fakuma 2024!
Hall A5 / Stand 5203
https://www.fakuma-messe.de/en/
with ENGEL inject 4.0
Our digital products and services support you throughout the entire product life cycle. From component design and sampling to production and maintenance & service. We have the right digital solutions to help you exploit the full potential of your ENGEL production cell and sustainably reduce your carbon footprint.
Digital solutions support you in the design of your plastic products. Based on a realistic simulation, you can define a suitable production concept and mould. The article design is optimised for its injection moulding capability. The component design is facilitated with the help of intelligent software programmes.
Our digital solutions support the sampling of injection moulds. The result: a process-stable mould. Innovative software products help to ensure the specified moulded part quality more quickly and easily. The mould and the process settings can be optimally and efficiently prepared for series production.
ENGEL's digital solutions ensure consistently good quality for your products and enable significant cost and energy reductions in your injection moulding production. With easy-to-use software solutions such as digital machine data acquisition, you have a continuous overview of your production, exploit all potential and support your employees.
Digital service solutions ensure higher availability and more output in production. With predictive maintenance systems, you detect wear and avoid unplanned downtime. The customer portal provides an overview of your plants. ENGEL hotliners resolve malfunctions quickly and globally with the remote maintenance tool, in a team and 24/7. Application engineers optimise your injection moulding processes virtually.
Digital solutions support you in the design of your plastic products. Based on a realistic simulation, you can define a suitable production concept and mould. The article design is optimised for its injection moulding capability. The component design is facilitated with the help of intelligent software programmes.
Our digital solutions support the sampling of injection moulds. The result: a process-stable mould. Innovative software products help to ensure the specified moulded part quality more quickly and easily. The mould and the process settings can be optimally and efficiently prepared for series production.
ENGEL's digital solutions ensure consistently good quality for your products and enable significant cost and energy reductions in your injection moulding production. With easy-to-use software solutions such as digital machine data acquisition, you have a continuous overview of your production, exploit all potential and support your employees.
Digital service solutions ensure higher availability and more output in production. With predictive maintenance systems, you detect wear and avoid unplanned downtime. The customer portal provides an overview of your plants. ENGEL hotliners resolve malfunctions quickly and globally with the remote maintenance tool, in a team and 24/7. Application engineers optimise your injection moulding processes virtually.
Large machine technology awaits you at our Expert Corner:
Extensive expert knowledge
State-of-the-art technology solutions
Our new pilot plant duo 5500 combi M
Everything depends on the plasticising unit. That's why you benefit from:
Development, production and support from a single source
Our broad portfolio of screws
In-house development of the shut-off nozzles
Reduced production costs: Up to 75% lower energy consumption with our temperature control solutions:
Speed-controlled temperature control unit e-temp
iQ flow control digital assistance system
eco-flomo & e-flomo plus, as well as the new eco-flomo XL water distributor for applications with high flow requirements
The operation of our injection moulding machines is now even easier, more convenient and safer - let yourself be guided intuitively through complex injection moulding processes with the added features:
Ergonomic control panel and screen
Intelligent assistance systems
Personalisability of navigation and pages
 "Hannes Fritz | ENGEL")
Speed up tool changes with the set-up assistant in your machine control and reduce your set-up times by up to 80%. Don't miss the live demonstrations of the set-up assistant on the machine exhibit victory 860/160 tech WP.
with sustainable solutions
We are taking the path to a green future with you. For over 15 years, we have been developing solutions for sustainable plastics processing. With our broad portfolio for processing recyclates we can close material cycles together.
Visit us at the Expert Corner at Fakuma and let our experts advise you on technology solutions on site.
 "Klaus Fellner | ENGEL")
Visit us at Fakuma at our Expert Corner. We will advise you individually and have the right solution for your recyclate.
 "Sustainability Report | ENGEL")
Sustainability is a fundamental pillar of all entrepreneurial activities and therefore a priority for ENGEL Group. Across several generations, the use of modern technology to achieve cost effectiveness, ethical conduct, social responsibility and environmental protection has been firmly anchored in our company’s values.
Our experts look forward to meeting you at our stand at Fakuma 2024!
Hall A5 / Stand 5203
https://www.fakuma-messe.de/en/
 "Hall plan Fakuma 2024")
get connected - with our partner exhibits
Discover more machine and automation solutions
| Partner | Hall | Machine | Application |
|---|---|---|---|
| Hack | A5 / Stand 5117 | e-motion 160 WP combi M | Diagnosis cartridge |
| TecPart | A5 / Stand 5104 | victory 210/50 tech | Drinking cup |
| ONI | A5 / Stand 5103 | e-mac 1565/280 | 6-pack Beverage crate |
| Meusburger | A2 / Stand 2313 & 2316 | e-mac 465/180 | Lunchbox |
| Lenzkes | A2 / Stand 2216 | victory 320/80 tech | Dice cup |
| Vasantha | A1 / Stand 1324 | e-mac 465/80 | COC syringes |
-
![Picture shows visitors at the ENGEL booth at Fakuma 2024]( "Visitors at the ENGEL booth at Fakuma 2024 | ENGEL")
ENGEL Impresses with Innovative Solutions and Customer Focus22 October 2024The 29th Fakuma, held from October 15th to 19th, 2024 in Friedrichshafen, once again affirmed its position as one of the most important trade fairs for plastics processing in Europe.
-
![Picture shows improved sealing and functionality with ENGEL’s innovative spherical check valve]( "Improved sealing and functionality with innovative spherical check valve | ENGEL")
ENGEL Brings Innovations in Plasticising to Fakuma 20249 October 2024At the “Plasticising” Expert Corner, ENGEL will introduce new technologies aimed at further increasing efficiency, precision, and quality in plastics production.
-
![Picture shows the new control concept of CC300 plus]( "Control unit CC300 plus I ENGEL")
The New Control Concept for Enhanced Ergonomics, Personalisation, and Operational Safety7 October 2024With the CC300 plus, ENGEL introduces an advanced control concept that excels with improved ergonomics and personalisation options.
-
![Picture shows ENGEL eco-flomo XL]( "eco-flomo XL | ENGEL")
More Power for Demanding Cooling Processes2 October 2024At Fakuma 2024, ENGEL unveils the latest model of its successful temperature water manifold: the eco-flomo XL.
-
![Picture shows fast and compact box change with the viper 20]( "Fast and compact box change with the viper 20 | ENGEL")
ENGEL Showcases Powerful Automation Solutions30 September 2024The combination of high load capacity, stability, ease of use, flexibility, and efficiency makes ENGEL's viper linear robots a first-class solution for automation in injection moulding production.
-
![Picture shows polyurethane flooding in the ENGEL clearmelt process]( "Polyurethane flooding in the clearmelt process | ENGEL")
ENGEL’s Innovations for Large Machines and Injection Moulding Processes26 September 2024At Fakuma 2024, ENGEL offers a comprehensive overview of the latest innovations in injection moulding and large-scale machinery at the "Large Machines & Technologies" Expert Corner.
-
![Picture shows ENGEL employee at injection moulding machine with the ENGEL set-up assistant]( "Set-up assistant | ENGEL")
How ENGEL’s Set-up Assistant Boosts Efficiency25 September 2024At Fakuma 2024, ENGEL will present innovative solutions shaping the future of plastics processing. A key highlight is the digital set-up assistant, designed to simplify the operation of injection moulding machines and significantly enhance production efficiency.
-
![Picture shows ENGEL part finder on smartphone]( "Part finder | ENGEL")
Customer Benefit in Focus at ENGEL's "inject 4.0" Stand23 September 2024At the digital solutions stand, ENGEL demonstrates how their innovative assistance systems optimise the entire production process – from initial design and testing to serial production and post-production service.
-
![Picture shows tie-bar-less and energy-efficient ENGEL e-victory 100]( "Tie-bar-less and energy-efficient e-victory 100 | ENGEL")
Increased Efficiency in LSR Injection Moulding with the ENGEL e-victory 10020 September 2024At Fakuma 2024, ENGEL will showcase a tie-bar-less e-victory 100 optimised for the highly precise production of liquid silicone rubber (LSR) parts.
-
![Pictures shows WINTEC t-win machine with expanded range of options]( "t-win machine with expanded range of options | WINTEC")
Ready for Europe with New Features and Proven Strength18 September 2024ENGEL is showcasing the latest generation of its WINTEC brand's two-platen t-win injection moulding machines.
-
![Picture shows ENGEL e-mac 500 with automation from TMA for in-mould labelling]( "e-mac 500 with automation from TMA for in-mould labelling | ENGEL")
ENGEL Unveils the New e-mac 500 with HIGH Clamping Drive at Fakuma 202416 September 2024ENGEL expands its proven range of fully electric injection moulding machines with the launch of the new e-mac 500, debuting at Fakuma 2024.
-
![Picture shows a tie-bar-less victory 160]( "Tie-bar-less victory 160 | ENGEL")
The ENGEL victory 160 with digital set-up assistant12 September 2024At Fakuma 2024, ENGEL will showcase its digital set-up assistant within a compact production cell featuring the tie-bar-less victory 160, optimised for efficient fitting production.
-
![Picture shows fully electric ENGEL e-mac 500 with HIGH-performance clamping drive and iQ motion control]( "Fully electric e-mac 500 with HIGH-performance clamping drive and iQ motion control | ENGEL")
Innovative Solutions with a Focus on Customer Benefits9 September 2024At Fakuma 2024, ENGEL is presenting its latest innovations, focusing on efficiency, digitalisation, and sustainability.
 "Visitors at the ENGEL booth at Fakuma 2024 | ENGEL")
 "Improved sealing and functionality with innovative spherical check valve | ENGEL")
 "Control unit CC300 plus I ENGEL")
 "eco-flomo XL | ENGEL")
 "Fast and compact box change with the viper 20 | ENGEL")
 "Polyurethane flooding in the clearmelt process | ENGEL")
 "Set-up assistant | ENGEL")
 "Part finder | ENGEL")
:focal(4328x1441:4329x1442) "Tie-bar-less and energy-efficient e-victory 100 | ENGEL")
 "t-win machine with expanded range of options | WINTEC")
 "e-mac 500 with automation from TMA for in-mould labelling | ENGEL")
 "Tie-bar-less victory 160 | ENGEL")
 "Fully electric e-mac 500 with HIGH-performance clamping drive and iQ motion control | ENGEL")
The individual press releases are available for download in the following languages: German, English, French, Polish, Italian, Czech
