- Home
- Injection moulding machines
- e-speed
The Hybrid, High-speed Injection Molding Machine Ideal for Thin Wall Plastic Parts e-speed Thin Wall Injection Molding Machine
The trend towards reduced wall thickness in packaging products is placing even greater demands on injection molding machines. The fast e-speed is our answer. It impresses with high performance on both the injection and clamping sides. Ensure profitable production of thin wall plastic parts, like thin wall plastic tubing or cups, with our e-speed.
 "Ivica Puskaric | ENGEL")
Our e-speed is uncompromisingly designed for maximum performance. The e-speed easily achieves the highly profitable production of thin-wall containers with flow path/wall thickness ratios of greater than 400 at the shortest cycle times.
By avoiding oil mist formation and having a closed lubrication system, no dirt can get onto your products. In addition, the extra-stable clamping platens ensure excellent platen parallelism. Perfectly suited for a wide range of molds. All this with cycle times down to less than 2 seconds. Designed for the 24/7 production common in the packaging industry.
The hybrid drive concept reliably reduces any energy peaks thanks to kinetic energy storage. When the moving platen brakes, it absorbs the kinetic energy and releases it again when accelerating. Ideal for load-dependent electricity costs.
The all-electric clamping unit combined with hydraulic injection is powered by large accumulators. The rapid acceleration ensures a maximum injection speed of up to 1,200 mm/s. Maximum injection pressure of well over 2,000 bar even with just a few cm of injection stroke. This enables reliable and complete filling of cavities for thin wall plastic parts – even with extreme flow path/wall thickness ratios.
By avoiding oil mist formation and having a closed lubrication system, no dirt can get onto your products. In addition, the extra-stable clamping platens ensure excellent platen parallelism. Perfectly suited for a wide range of molds. All this with cycle times down to less than 2 seconds. Designed for the 24/7 production common in the packaging industry.
The hybrid drive concept reliably reduces any energy peaks thanks to kinetic energy storage. When the moving platen brakes, it absorbs the kinetic energy and releases it again when accelerating. Ideal for load-dependent electricity costs.
The all-electric clamping unit combined with hydraulic injection is powered by large accumulators. The rapid acceleration ensures a maximum injection speed of up to 1,200 mm/s. Maximum injection pressure of well over 2,000 bar even with just a few cm of injection stroke. This enables reliable and complete filling of cavities for thin wall plastic parts – even with extreme flow path/wall thickness ratios.
Do you have questions about the injection molding machine for thin wall plastic parts?
 "Available machine sizes | ENGEL")
-
![Picture shows meeting between ENGEL and John Erwes from Erwes-Reifenberg]( "Cooperation with Erwes-Reifenberg I ENGEL")
Symbiosis of mold and injection molding machineApril 30, 2024The tool manufacturer Erwes-Reifenberg has strategically repositioned itself with the acquisition of a high-performance injection molding machine. Investing in the e-speed 550 enables them to overcome technical challenges in the packaging industry.
-
![Image shows mold movement of an ENGEL injection molding machine]( "Optimization of injection molding with iQ motion control | ENGEL")
Blog![Susanne Zinckgraf]( "Susanne Zinckgraf")
Susanne ZinckgrafMay 24, 2023Injection molding optimization thanks to adapted mold movementMay 24, 2023iQ motion control reduces cycle time of high-performance applications
-
digital solutions
-
packaging
-
cost effectiveness
8 minutes -
-
![Picture shows a thin-walled container manufactured on an ENGEL e-speed injection molding machine]( "Injection compression of thin-walled containers I ENGEL")
Blog![Johannes Hinterdorfer]( "Johannes Hinterdorfer")
Johannes HinterdorferOctober 8, 2021Injection compression in the packaging industryOctober 8, 2021The combination of the special ENGEL coinmelt process with a stack mold enables competitive unit costs with low energy consumption.
-
technology
-
packaging
-
systems solution
6 minutes -
:focal(978x316:979x317) "Cooperation with Erwes-Reifenberg I ENGEL")
 "Optimization of injection molding with iQ motion control | ENGEL")
 "Injection compression of thin-walled containers I ENGEL")
)
)
