- Home
- Injection moulding machines
- e-speed
The Hybrid, High-speed Injection Moulding Machine for Thin-wall Plastic Parts e-speed Thin Wall Injection Moulding Machine
The trend towards reduced wall thicknesses for thin-walled packaging products is placing ever greater demands on injection moulding machines. The fast e-speed is our answer. It delivers high performance on both the injection and clamping sides. Ensure profitable production of thin-wall plastic parts with our e-speed.
 "Ivica Puskaric | ENGEL")
Our e-speed is uncompromisingly designed for maximum performance. The e-speed easily achieves the highly profitable production of thin-walled containers with flow–path-to-wall-thickness ratios of greater than 400 in the shortest cycle times.
By avoiding oil mist formation and a closed lubrication system, no dirt can get onto your products. In addition, the extra-stable clamping platens ensure excellent platen parallelism. Perfectly suited for multiple moulds. All this with cycle times down to less than 2 seconds. Designed for the 24/7 production common in the packaging industry.
The hybrid drive concept reliably reduces any energy peaks thanks to kinetic energy storage. When the moving platen brakes, it absorbs the kinetic energy and releases it again when accelerating. Ideal for load-dependent electricity tariffs.
The all-electric clamping unit combined with hydraulic injection is powered by large batteries. The fast acceleration ensures a maximum injection speed of up to 1,200 mm/s. Maximum injection pressure of well over 2,000 bar even with just a few cm of injection stroke. This enables reliable and complete filling of cavities for thin-wall plastic parts – even with extreme flow-path-to-wall-thickness ratios.
By avoiding oil mist formation and a closed lubrication system, no dirt can get onto your products. In addition, the extra-stable clamping platens ensure excellent platen parallelism. Perfectly suited for multiple moulds. All this with cycle times down to less than 2 seconds. Designed for the 24/7 production common in the packaging industry.
The hybrid drive concept reliably reduces any energy peaks thanks to kinetic energy storage. When the moving platen brakes, it absorbs the kinetic energy and releases it again when accelerating. Ideal for load-dependent electricity tariffs.
The all-electric clamping unit combined with hydraulic injection is powered by large batteries. The fast acceleration ensures a maximum injection speed of up to 1,200 mm/s. Maximum injection pressure of well over 2,000 bar even with just a few cm of injection stroke. This enables reliable and complete filling of cavities for thin-wall plastic parts – even with extreme flow-path-to-wall-thickness ratios.
Do you have questions about the injection moulding machine for thin-wall plastic parts?
 "Available machine sizes | ENGEL")
-
![Picture shows meeting between ENGEL and John Erwes of Erwes-Reifenberg]( "Partnership co-operation Erwes-Reifenberg I ENGEL")
Symbiosis of mould and injection moulding machineApril 30, 2024The mould manufacturer Erwes-Reifenberg has strategically repositioned itself with the acquisition of a high-performance injection moulding machine. The investment in the e-speed 550 makes it possible to overcome technical challenges in the packaging sector.
-
![Picture shows mould movement of an ENGEL injection moulding machine]( "Optimisation in injection moulding with iQ motion control | ENGEL")
Blog![Susanne Zinckgraf]( "Susanne Zinckgraf")
Susanne ZinckgrafMay 24, 2023Injection moulding optimisation thanks to adapted mould movementMay 24, 2023iQ motion control reduces the cycle time in the high-performance range
-
digital solutions
-
packaging
-
cost effectiveness
8 minutes -
-
![Picture shows a thin-walled container manufactured on an ENGEL e-speed injection moulding machine]( "Injection moulding of thin-walled containers I ENGEL")
Blog![Johannes Hinterdorfer]( "Johannes Hinterdorfer")
Johannes HinterdorferOctober 8, 2021Injection moulding in the packaging industryOctober 8, 2021The combination of the special ENGEL coinmelt process with a stack mould enables competitive unit costs with low energy consumption.
-
technology
-
packaging
-
systems solution
6 minutes -
:focal(978x316:979x317) "Partnership co-operation Erwes-Reifenberg I ENGEL")
 "Optimisation in injection moulding with iQ motion control | ENGEL")
 "Injection moulding of thin-walled containers I ENGEL")
)
)
