Your local contact in

We look forward to receiving your enquiry

Personal details

Please fill in the mandatory field.

Please fill in the mandatory field.

Please fill in the mandatory field.

Please enter a valid email address.

Please fill in the mandatory field.

Please fill in the mandatory field.

Please fill in the mandatory field.

Which topic can we help you with?

Please fill in the mandatory field.

/ 350 Characters

Please note the maximum character length.

* Please fill the required fields

Please accept our data protection.

Unfortunately, your request could not be sent due to a system error. Please try again later.

Loading
Unfortunately, no results could be found.
All results for search term

Direct processing of rPET in injection moulding

Solutions for injection moulding thin-wall PET and rPET packaging

We are expanding applications of PET and rPET in injection moulding: Thanks to the high-performance injection unit of the e-speed machine, you can produce thin-walled containers from recycled PET in just one production step. This enables cost-effective recycling and upcycling of PET bottles and the use of 100% rPET for food packaging.

Why and how to process rPET in injection moulding?
Avoid fines and special taxes with rPET
Picture shows a thin-wall container made of rPET with used PET bottles
Take advantage of the established PET recycling stream

PET is currently the only packaging plastic that can be reused in large quantities as recycled material to produce rPET food packaging. With our technology, you can economically process and even upcycle rPET in injection moulding. In addition to bottle-to-bottle, we also enable a bottle-to-cup cycle. By using rPET, you can produce thin-wall packaging without the threat of penalty taxes.

Injection moulding ready-to-fill PET packaging in one step
Picture shows tool area of an e-speed with injection mould for thin-walled containers made of rPET
High-performance injection unit of the ENGEL e-speed enables direct processing of PET and rPET

With our e-speed injection moulding machine, you can produce ready-to-fill, labeled containers economically in just a single process step. Its extremely dynamic injection unit achieves a maximum speed of up to 1,400 mm/s and an injection pressure of up to 2,600 bar. This allows PET and rPET to be injected directly into thin-walled moulds. The time-consuming moulding and blow moulding of thick-walled preforms is no longer necessary.

Labeling of rPET packaging according to national regulations
Picture shows two food packages made of rPET with different labels
rPET is suitable for various material cycles

The legal regulations for recycling labeled plastic packaging can vary considerably. Thin-walled containers made of rPET are compatible with various label materials, allowing them to be produced in compliance with the requirements of target markets.

Short cycle times and low wall thicknesses in the processing of rPET in injection moulding
Picture shows e-speed injection moulding machine from ENGEL
Thanks to the high-performance injection moulding machine e-speed

Our e-speed series is designed for reliable performance. The machine enables you to economically produce thin-wall packaging thanks to maximum output and reduced material usage. You can achieve cycle times of under 2 seconds and extreme flow path to wall thickness ratios. This is ensured by powerful plates and drives. Our e-speed machine is the best choice when it comes to processing rPET in injection moulding.

Products and solutions for rPET processing in injection moulding
Picture shows thin-walled plastic part produced by thin-wall injection moulding

Thin-wall injection moulding

Benefit from our many years of expertise in injection moulding of thin-wall packaging.

Picture shows injection moulding machine for the production of thin-walled plastic parts

Injection moulding machine for thin-walled plastic parts

e-speed

The hybrid, fast injection moulding machine for thin-wall packaging with extreme flow path to wall thickness ratios.

Picture shows logo for plastics recycling from ENGEL

Circular Economy & plastics recycling

Get an overview of our services for recyclate processing and Circular Economy.

FAQ about rPET injection moulding

The European Food Safety Authority (EFSA) has approved numerous recycling processes for PET, making rPET available in large quantities in Europe. PET is currently the only packaging plastic that can be recycled into food packaging on an industrial scale. ENGEL already offers a complete and production-ready solution for injection moulding of thin-wall packaging made of rPET.

In addition to the possibility of using up to 100% recyclate, PET has several advantages:

  • Drop, breakage and load tests revealed significantly greater resistance compared to PP.

  • PET exhibits approximately 20 times higher barrier properties against oxygen, ensuring longer food freshness.

  • The barrier effect can be further improved with an additional EVOH layer.

Both PET and PP labels can be used in the in-mould labelling process for products made of PET. To prevent the transparent PET from mixing with the colour pigments of the label during the subsequent recycling process, labels with washable colours or labels that detach and float during the washing process can optionally be used. This means that thin-wall PET packaging complies with EU and US recycling guidelines.

Our experience shows that processing PET and rPET in injection moulding directly works smoothly up to a flow path to wall thickness ratio of 1:240moulding. For larger ratios, the component’s geometry and the material’s intrinsic viscosity significantly impact process stability. We would be happy to advise you in detail.

The direct processing of PET into thin-walled products requires significantly higher injection pressures of up to 2200 bar. Furthermore, the processing temperature, in comparison to PP and PS, is higher, exceeding 280°C. Modifications are necessary in order to use moulds designed for processing PP or PS for injection moulding PET packaging.

More information and details on direct processing of PET and rPET in injection moulding can be found in the ePaper of the Kunststoffe magazine. You can also contact us using the contact form.

Your contact person for rPET injection moulding
Picture shows Global Key Account Manager Packaging at ENGEL Austria

We have developed a market-ready complete solution for the efficient production of thin-wall packaging from PET and rPET. I am available for any questions and concerns on this topic.

Johannes Hinterdorfer, Global Key Account Manager Packaging at ENGEL Austria
Would you like to utilize the potential of PET and rPET for your products?

Benefit from our extensive expertise.

Application in the food industry: direct processing of rPET in injection moulding

The video shows an example of the use of rPET for food packaging. In thin-wall injection moulding, the containers are manufactured and labelled in a single process step. They leave the production line ready for filling.

Video shows the injection moulding of thin-walled rPET plastic parts >

Our rPET injection moulding cell in pictures

ENGEL Team

Sales

Write to us

The ENGEL team will be happy to assist you with comprehensive know-how on the subject of injection moulding.

Your browser is out of date.

Internet Explorer is no longer supported. Please switch to a current browser to be able to use engelglobal.com to its full extent.

Your browser is out of date.

Internet Explorer is no longer supported. Please switch to a current browser to be able to use engelglobal.com to its full extent.